200mm x 18mm Fascia Board in Cream x 5m
- Length 5m
- Height 200mm
- Thickness 18mm
- Low maintenance, product will not crack or warp and require little maintenance.
- No sanding, painting or treatment needed.
- Ready to install, clean, hassle-free installation with no dust or mess.
Foam profiles / rigid profiles
BS1006 / 1990 Part A03 - Tests undertaken by BSI Testing for colour change resulted
in an actual classification of 4 / 5 (where 1= most change and 5 = least change).
Tested to BS476 Part 7:1997 Class 1 surface spread of fire. Woodgrain profiles do
not carry a fire rating.
Tested to BS476 Part7:1997 Class 1 surface spread of fire.
Foam profiles 0.07 (w/mk)
This low coefficient of thermal conductivity for Foam Profiles indicates thermal insulation properties better than brick, concrete or timber.
Rigid profiles 0.14 (w/mk)
Foam profiles 0.55 - 0.6 g/cm3
Rigid profiles 1.40 - 1.50 g/cm3
Foam and rigid profiles should not require any further maintenance other than the occasional wash down with a non-scratch, mild detergent and water. They are resistant to most acids and alkalis but can be damaged by solvents. Great care should be taken when in contact with creosote or bitumen-based products as these will cause staining of the profiles. Painting is not recommended on foam profiles unless done by an approved contractor.
Eurocell cellular foam PVC-U products are easy to work with using normal hand tools for drilling and cutting. It is recommended that the saw should have a fine tooth blade (PVC-U saws are available from Eurocell branches). PVC-U products should not be fitted below 0˚C as the boards may become brittle.
Handling and storage
Profiles are packed in polythene sleeves identifying a particular shade of white. Pr otective tape should only be removed immediately before installation to prevent damage.
The Eurocell Building Plastics products supplied by Eurocell Profiles Ltd are produced in accordance with a BS EN 1SO
9001:2000 accredited quality system.
Based on the technical testing information obtained from BSI, the white foam and rigid profiles are covered by a 20-year guarantee and foiled woodgrain foam and rigid profiles are covered by a 10-year guarantee on colour fastness, provided they are fitted to the manufacturers recommendations.