200mm x 9mm Ogee Capping Board in Golden Oak x 5m

Product description

Capping Board is our uPVC fascia solution that fits directly over the top of your existing boards to give you added protection and a clean finish. If you need to replace your boards you might want to look at our Replacement Fascia 18mm section.

9mm Fascia Capping Board are used in the exterior of the building, mainly residentially, and forms part of the roofline. Fascia Boards are composed of uPVC run along the edge of the roof. The fascia is 9mm in thickness and come in a variety of colours and sizes to suit any requirements. This product is one of the market leading Roofline Products and manufactured to BSI standards.

• Stylish and cost-effective PVC-U boards designed to fit over existing timber fascias
• Standard or decorative ogee fascia board for direct fixing to existing sound fascia boards or plywood
• Designed for ease of fitting and low maintenance, with no painting required
• An attractive and easy to install solution for any replacement roofline project

200mm x9mm

5m lengths

Technical specifications

Colour fastness
Foam profiles / rigid profiles
BS1006 / 1990 Part A03 - Tests undertaken by BSI Testing for colour change resulted
in an actual classification of 4 / 5 (where 1= most change and 5 = least change).

Fire rating
Foam profiles
Tested to BS476 Part 7:1997 Class 1 surface spread of fire. Woodgrain profiles do
not carry a fire rating.
Rigid profiles
Tested to BS476 Part7:1997 Class 1 surface spread of fire.

Thermal conductivity
Foam profiles 0.07 (w/mk)
This low coefficient of thermal conductivity for Foam Profiles indicates thermal insulation properties better than brick, concrete or timber.
Rigid profiles 0.14 (w/mk)

Density
Foam profiles 0.55 - 0.6 g/cm3
Rigid profiles 1.40 - 1.50 g/cm3

Maintenance
Foam and rigid profiles should not require any further maintenance other than the occasional wash down with a non-scratch, mild detergent and water. They are resistant to most acids and alkalis but can be damaged by solvents. Great care should be taken when in contact with creosote or bitumen-based products as these will
cause staining of the profiles. Painting is not recommended on foam profiles unless done by an approved contractor.

Workability
Foam profiles
Trade Superstore Online cellular foam PVC-U products are easy to work with using normal hand tools for drilling and cutting. It is recommended that the saw should have a fine tooth blade (PVC-U saws are available from Trade Superstore Online branches). PVC-U products should not be fitted below 0˚C as the boards may become brittle.

Handling and storage
Profiles are packed in polythene sleeves identifying a particular shade of white. Protective tape should only be removed immediately before installation to prevent damage.

British Standards
The Trade Superstore Online Building Plastics products supplied by E Profiles Ltd are produced in accordance with a BS EN 1SO
9001:2000 accredited quality system.

Guarantees
Based on the technical testing information obtained from BSI, the white foam and rigid profiles are covered by a 20-year guarantee and foiled woodgrain foam and rigid profiles are covered by a 10-year guarantee on colour fastness, provided they are fitted to the manufacturers recommendations.